Product ID:55113A OLYMPIC S/T 716 OIL
MSDS Date:11/28/1990
FSC:8010
NIIN:00F004850
MSDS Number: BBRDS

PPG INDUSTRIES

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: PPGIN

PPG INDUSTRIES

ALLISON PARK, PA 15101-5000 US

Telephone: 412-492-5555/304-843-1300

Cage: PPGIN

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 2-5%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

SODIUM ALUMINOSILICATE *92-3*

CAS: 1344-00-9

Fraction By Weight: 1-2%

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 35-40%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

FILM FORMERS

Fraction By Weight: <60%

RESIN

Fraction By Weight: <60%

ADDITIVES

Fraction By Weight: <60%

<350 G/L

RTECS: 9999999VO

7.59

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL OR FATAL.
EYES/SKIN: IRRITATION. INHALATION: HARMFUL, IRRITATION TO EYES,
NOSE, & THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: RESPIRATORY SYSTEM IRRITATION,
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE, EYE
WATERING/HEADACHES/NAUSEA/DIZZINESS/LOSS OF COORDINATION. EYES:
REDNESS/ITCHING/BURNING SENSATION/VISUAL DISTURB ANCES. SKIN:
DRYNESS/ITCHING/CRACKING/BURNING/REDNESS/SWELLING.

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION:
REMOVE TO FR ESH AIR. APPLY ARTIFICIAL RESPIRATION &OTHER
SUPPORTIVE MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Flash Point Method:PMCC
Flash Point:105F
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL, OR UNIVERSAL AQUEOUS FILM
FORMING (FOAM) TO EXTINGUISH NFPA CLASS II COMBUSTIBLE LIQUID
FIRES.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILDUP/AUTOIGNITION/EXPLOSION. FOG NOZZLES ARE PREFERRED. USE
SCBA.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION & WEAR PROTECTIVE
EQUIPMENT, IF NOT EVACUATE AREA. REMOVE ALL SOURCES OF IGNITION.
TAKE UP SPILLED MATERIAL W/SAWDUST, VERMICULITE, OR OTHER ABSORBENT
MATERIAL & PLACE INTO CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE FOR NFPA
CLASS II COMBUSTIBLE LIQUIDS. KEEP TIGHTLY CLOSED.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. AVOID INHALATION OF
VAPOR OR SPRAY MIST. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING T HE CONTENTS CAN BE HARMFUL OR FATAL.

Respiratory Protection:USE NIOSH/MSHA APPROVED (TC-23C) PAINT SPRAY OR
AIR-SUPPLIED (TC-19C) RESPIRATORS TO REDUCE EXPOSURE. PROVIDE FRESH
AIR ENTRY.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST: IN VOLUME & PATTERN TO
KEEP CONCENTRATION BELOW LOWEST SUGGESTED EXPOSURE.
Protective Gloves:PVA/NEOPRENE/NITRILE BUTYL/LATEX RUBBER
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES
Other Protective Equipment:FULL FACE SHIELD, IMPERMEABLE APRONS
(POLYVINYL ALCOHOL/NEOPRENE/NITRILE BUTYL/LATEX RUBBER, PROTECTIVE
CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING SYSTEM, READ MSDS'S
FOR OTHER COMPONENTS BEFORE BLENDING AS RESULTING MISTURE MAY HAVE
HAZARDS OF ALL PARTS. PERCENT SOLID BY WT: 63.54. WELDING, BRAZ ING
OR FLAME CUTTING ON SURFACES COATEDW/THIS PRODUCT MAY PRODUCE FUMES
INCLUDING CARBON MONOXIDE.

Boiling Pt:B.P. Text:149-381.2F
Vapor Pres:3.5
Vapor Density:>1
Spec Gravity:0.91
Evaporation Rate & Reference:(BU AC = 100): 17
Solubility in Water:0.7%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS.
Percent Volatiles by Volume:42.50%

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, ELECTRICAL EQUIPMENT,
SPARKS, OPEN FLAMES, HOT SURFACES, TEMPS >120F, & OTHER SOURCES OF
IGNITION
Hazardous Decomposition Products:TOXIC GASES, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. COMBUSTIBLE LIQUID. UN1263. EMPTY CONTAINERS
SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE
MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.